quadroPOL
quadroPOL
quadroPOL

 

  • Type/ Utility
  • Width/ 10HP
  • Power/ +45mA/-35mA
  • Depth/ 30mm

 
The quadroPOL is a multi-functional module with four identical channels. Each of them can individually work as a manual or voltage controlled attenuator and inverter, a ring modulator or a constant voltage source. It´s also possible to link two or more channels together to work as a voltage controllled polarizing mixer.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

269,00  Add to cart
uniCYCLE VCO
uniCYCLE VCO
uniCYCLE VCO

 

  • Type/ Oscillator
  • Width/ 10HP
  • Power/ +70mA/-60mA
  • Depth/ 45mm

 
The UniCYCLE painstakingly follows 1V/octave for over 5 octaves.

It simultaneously produces six wave forms, which include sawtooth, triangle, pulse and sine, but also unusual selections like “even” and “double sawtooth” (double frequnecy), which can both be modulated by the PWM controls. “Even” has only even overtones and can be transformed into a sine-like wave form. “double sawtooth” can be transformed into a triangular wave form.

The UniCYCLE is capable of soft and hard oscillator sync as well as exponential and linear FM.
 
 
In stock. Shipping in 24 H.Contact

289,00  Add to cart
tVCF Extension
tVCF Extension
tVCF Extension

 

  • Type/ Expander
  • Width/ 10HP
  • Power/ +30mA/-20mA
  • Depth/ 30mm

 
twinVCFilter is a versatile filter module itself. But there are times when you need some additional features like a notch-filter. In this case tVCF-Extension is your friend.

Individual Filter Outputs
tVCF-Extension has got individual outputs for each filter type of twinVCFilter’s filter-sections and even adds notch outputs. You can use all outputs at the same time.

Polarizers
As you might know, twinVCFilter already has two CV-inputs per filter section. We thought that might not be enough for complex patches, so tVCF-Extension has additional CV-inputs to modulate the cutoff-frequencies. Each with a dedicated polarizer for attenuating and inverting incoming voltages.
With these you will get new modulation possibilities like controlling both cutoff-frequencies at the same time in parallel or contrary.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

139,00  Add to cart
TwinVCFilter
TwinVCFilter
TwinVCFilter

 

  • Type/ Filter
  • Width/ 24HP
  • Power/ +75mA/-55mA
  • Depth/ 40mm

 
There is almost no modular system without at least one filter-module. You can look at them as the stars within the giant eurorack-jungle. twinVCFilter is such a star as well. A dual filter module with flexible routing and excellent audio properties. It covers a huge range of different applications without the slightest effort.

Features and Routing
Each filter section of twinVCFilter works as low- or highpass-filter with a slope of 12 dB/octave or as bandpass-filter with 6 db/octave. Signals can be directed in three ways through the module:

serial: The incoming signal passes both filter sections in a row.
dual: The filter sections act completely separated of each other. As if they were two individual filter modules.
parallel: The incoming signal passes both filters at the same time.
 
Coming soon. Contact for more infoContact

389,00  Add to cart
FourMulator
FourMulator
FourMulator

 

  • Type/ LFO
  • Width/ 34HP
  • Power/ +120mA/-10mA
  • Depth/ 25mm

 

With fourMulator we created a digital quad-LFO-module for the Eurorack-modular standard offering a lot more than typical cyclic modulations. Because of the individual modulators’ (LFOs) ability to sync to a common master clock, you are able to both create individual sound movements or complex and rhythmical modulation structures.

The modulators

Every LFO offers a choice of six wave forms: ascending or descending saw tooth, square, triangle, sine and a random curve (Sample & Hold). These oscillate in frequencies between 0.05Hz (20 seconds) and approximately 100Hz – fast enough for sonic alienation of oscillators, filters and VCAs. Each modulator offers individual wave-form- and trigger-outputs. The latter output a trigger impulse with every restart of the wave form. In addition, individual reset- and CV-inputs allow adding further manipulations from externally or within fourMulator.

Synchronization

The four modulator sections work independently generally, but may be synchronized to a clock-signal.
Two or more synchronized modulators oscillate at the same frequency, but not necessarily at identical phase. A synced modulator may be shifted by up to 180° – a half-cycle – to its neighbor. This way, you may easily create counter-rotating modulations. And by using the CV-inputs for phase modulation, even more complex structures become possible.
When being synchronized to a clock, the modulators oscillate with defined but adjustable clock divisions to the reference. Here too, being able to modulate the dividers by a control-voltage, highest-level versatility is guaranteed.
Both sync-modes can finally be combined. This way, you may synchronize one modulator to a reference clock, while it simultaneously serves as a master for its right neighbor.

CLOCK generator (CLK)

fourMulator has a clock-generator integrated. Its tempo can be set by using the TAP-button but also by using an external clock reference.

 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

369,00  Add to cart
Twincussion
Twincussion
Twincussion

 

  • Type/ Drums
  • Width/ 24HP
  • Power/ +105mA/-70mA
  • Depth/ 45mm

 

twinCussion is a dual channel drum-synthesizer module. Its components are explicitly designed to create percussive sounds while its flexible interconnections make it a must-have for rhythm based modular systems.

Special units A and B

twinCussion offers two sensibly structured sound engines, each consisting of an oscillator (complemented by a noise generator in engine 2), a voltage controlled amplifier and an envelope generator. Both sound engines can be used independently or being combined for more complex sounds. The internal structure can be edited and expanded at will, thanks to the multiple in- and outputs being available.

Versatile expert

twinCussion is a versatile sound chameleon. Although its sound engine is specialized in electronic drum sounds, it is not limited to specific instruments of this genre. This module generates pushing bass drums, prominent snares and chirping hi-hats with ease. And there is much more to twinCussion if using a little creative patching. Unleash numerous sounds like wooden clicks, metallic pings and a lot more.

 
Download the Twincussion manual HERE
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

389,00  Add to cart
QMI2 Quad Midi Interface
QMI2 Quad Midi Interface
QMI2 Quad Midi Interface

 

  • Type/ Midi
  • Width/ 24HP
  • Power/ +60mA/-2mA
  • Depth/ 25mm

 

Format conversion the flexible way

Our quad MIDI Interface picks up the flexible voice assignment of VERMONA’s PERfourMER MKII to provide a fourfold MIDI-to-CV/Gate converter for Eurorack-compatible modular systems. This way, you can play your modular synthesizer in different monophonic modes or even polyphonically using MIDI.

More than just pitch

Each of the four “output channels” offers a CV-output with 1V/octave-characteristic, a gate-output plus two additional control voltage outputs. These can be easily addressed by MIDI-controllers such as the modulation-wheel or pitch bender. The output channels can freely be combined or be used with independent MIDI-channels. Combined output channels can be used in unison, monophonically with rotating voice assignment or even to create polyphony.<br/> qMI 2 also offers four clock-divider-outputs. These convert incoming MIDI-clock signals into analogue gate-voltages. A reset-output allows sequencers with corresponding input to run in sync by MIDI-start/stop commands.<br/> A new feature of qMI 2 is the option to switch between both monophonic voice assignment modes using a gate signal.

Easy access to functionality

An important part of the modular concept is the easy access to every parameter, without using displays or complicated menu structures. qMI 2 will help you to integrate your modular-system into your MIDI-setup straight-forwardly!

 
Download the QMID 2 manual HERE
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

329,00  Add to cart
TAI4 Audio Interface
TAI4 Audio Interface
TAI4 Audio Interface

 

  • Type/ In&Out
  • Width/ 14HP
  • Power/ +20mA
  • Depth/ 42mm

 
The TAI-4 by Vermona is a 2×2 channel audio interface module for balancing signals coming from the modular system and for un-balancing audio signals that are sent to the modular.

Unlike other modules of that kind that work with electrical balancing, the TAI-4 has isolating transformers and thus features true balancing.

The upper part of the module consists of two identical channels with balanced XLR (female) connectors as inputs and 3.5mm mono-minijacks as outputs. Rocker switches serve for adjusting levels (0dB, +6dB, +12dB).
The bottom part has two output channels with 3.5mm minijacks as inputs and XLR-males as outputs. We find rocker switches for adjusting levels as well (-12dB, -6dB, 0dB).
 
 
In stock. Shipping in 24 H.Contact

329,00  Add to cart
TwinOut
TwinOut
TwinOut

 

  • Type/ In&Out
  • Width/ 8HP
  • Power/ +25mA/-25mA
  • Depth/ 36mm

 
Beside spectacular sound-engines and -shapers, conventional and uncommon sources and modulators of control voltages, a modular synthesizer also needs a choice of modules to handle the daily routine. twinOUT is such a module – the perfect connection to your studio.

This DI-box in a module offers two adjustable, electronically balanced XLR-outputs for stereo or independent dual-mono use. An additional headphone output, also suited for line level output completes twinOUT’s feature-set.
To bring out the best of your modular synthesizer, there’s no getting around the twinOUT!
Just like every VERMONA module, each twinOUT is produced in Vermona’s “elektroakustische Manufaktur”.

– Frequency Range: 20 Hz – 20 kHz (±0,2 dB)
– Signal-to-Noise ratio: > 90 dB
– THD+Noise: 0,01%
 
 
In stock. Shipping in 24 H.Contact

219,00  Add to cart
TwinVcamp
TwinVcamp
TwinVcamp

 

  • Type/ VCA
  • Width/ 10HP
  • Power/ +60mA/-30mA
  • Depth/ 30mm

 
Our twinVCAmp was designed as a flexible and equally high grade dual VCA. Its luxurious outfit and though-out circuitry make it a valuable tool for every modular system – naturally with superior sonic quality.
Per VCA, the amplification ratio can be set to exactly 1:1 or 1:4. This way, weak input signals can be expediently boosted in level. At the same time, high level audio signals will be distorted and compacted in a harmonic and musical way.
The characteristics of both VCAs can individually be switched from linear to semi-logarithmic – a curve specifically designed for musical applications.

Team-player or lone fighter

Both VCAs can be used independently or in combination. Available are three possibilities:

  • VCA1 can serve as offset-generator for its twin brother.
  • Both VCAs can share a control voltage source.
  • The sum of both VCAs can be used from a separate output.

Each module is carefully assembled, checked and packed in our electroacoustic manufactory in Erlbach, Germany. Circuit specific refinements and the use of quality components build the foundation for a module of highest usefulness and lifespan. twinVCAmp is more than just two VCAs in a single module: It is a dual- or stereo-VCA, a voltage controlled 2-in–1 mixer, overdrive and more…
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

299,00  Add to cart
VcDrive
VcDrive
VcDrive

 

  • Type/ Effect
  • Width/ 6HP
  • Power/ +30mA/-30mA
  • Depth/ 36mm

 

VCDrive is a voltage controlled distortion module suited for all kind of signals within your modular system.

The large sonic spectrum of VCDrive ranges from slight fattening of audio signals to intense overdrive. At the same time, it will always preserve its elegant basic nature. This module is not a brutal destroyer, but rather an enormous muscle pack with a classy core.

The amount of distortion can be manually adjusted or being modulated by an external control voltage. In the simplest case, you use an envelope or LFO to do so. However, given a good portion of creativity, VCDrive will easily deliver more complex results and therefore can be so much more than just a “typical” distortion unit.

VCDrive is a premium sound shaping device that should not be missing in any modular system. It is an effective team player when it comes to create cutting bass-, lead- and drum-sounds. It is also of great help when designing weird effect-sounds.

 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

219,00  Add to cart