1F
1F

 

  • Type/ Switch
  • Width/ 4HP
  • Power/ +15mA/-10mA
  • Depth/ 38mm

 
The 1F is a voltage controlled switch, intended to be ‘one friend’ for your sequencer. Its design has been specially focused on working with sequences, by giving them some randomness, applying transpositions or constant variation over time. For this, 0.1% tolerance resistors have been used to achieve exact unitary gains for precision summing of the v/oct signals. More detailed info on the demo video.
 
 
Download the manual HERE
 


 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

Add to cart
4R
4R

 

  • Type/ Random
  • Width/ 2HP
  • Power/ +50mA/-30mA
  • Depth/ 50mm

 
The 4R is a quad random voltage generator in 2HP. It generates two different random stepped voltages per input, each time a rising edge is sensed at TRIG1 or TRIG2. The inputs are independent so they can work at different clock speeds. As TRIG2 is normalled to TRIG1 it is also possible to get 4 random values with just one trigger. The voltage range of each pair of outputs can be set as unipolar (0V to +5V) or bipolar (-5V to +5V).
 


 
 
Coming soon / february 2018. Contact for more infoContact

Add to cart
8S
8S

 

  • Type/ Sequencer
  • Width/ 8HP
  • Power/ +55mA/-10mA
  • Depth/ 38mm

 
The 8S is an 8 step sequencer in 8 HP with control over parameters of the sequence as reset, hold, random step and direction. It’s been designed to work with clock related signals like triggers or gates but any type of CV signals can be used at its inputs. The output signal path is completely analog and its range can be set as unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back.
 


 
In stock. Shipping in 24 H.Contact

149,00  Add to cart
Kit 8S
Kit 8S

 

  • Type/ Sequencer
  • Width/ 8HP
  • Power/ +55mA/-10mA
  • Depth/ 38mm

 
The 8S is an 8 step sequencer in 8 HP with control over parameters of the sequence as reset, hold, random step and direction. It’s been designed to work with clock related signals like triggers or gates but any type of CV signals can be used at its inputs. The output signal path is completely analog and its range can be set as unipolar (0 to +5 volts) or bipolar (-5 to +5 volts) via jumper on the back.
 
 
Build Document HERE
 


 
In stock. Shipping in 24 H.Contact

110,00  Add to cart
2M
2M

 

  • Type/ Mixer
  • Width/ 6HP
  • Power/ +25mA/-25mA
  • Depth/ 38mm

 

2M are two unity gain mixers in 6HP. Each mixer has level controls for the 3 inputs and also for the output. As its design has been specially focused in audio applications, all the input potentiometers are audio-taper type. Low distortion / high quality audio op-amps have been also used in order to achieve clean audio mixing. It is DC-coupled, so it can perform CV signal mixing as well. Especially useful for small systems and submixing or stereo mixing patches.

Technical specifications:
– 6HP
– 38 mm depht
– Current Consumption: +12V/-12V: 25mA
 
 
In stock. Shipping in 24 H.Contact

129,00  Add to cart
Kit 2M
Kit 2M

 

  • Type/ Mixer
  • Width/ 6HP
  • Power/ +25mA/-25mA
  • Depth/ 38mm

 
2M are two unity gain mixers in 6HP. Each mixer has level controls for the 3 inputs and also for the output. As its design has been specially focused in audio applications, all the input potentiometers are audio-taper type. Low distortion / high quality audio op-amps have been also used in order to achieve clean audio mixing. It is DC-coupled, so it can perform CV signal mixing as well. Especially useful for small systems and submixing or stereo mixing patches.

Technical specifications:
– 6HP
– 38 mm depht
– Current Consumption: +12V/-12V: 25mA
 
 
Build Document HERE
 
In stock. Shipping in 24 H.Contact

95,00  Add to cart