SD909
SD909

 

  • Type/ Drums
  • Width/ 8HP
  • Power/ +35mA/-30mA
  • Depth/ 43mm

 
The SD909 adapts the iconic TR-909 snare drum and noise generator for use in the Eurorack modular synthesizer format. We painstakingly tested the module in our lab to sound like a fresh machine coming off of the assembly line back in the 80s. On top of the original circuit, we have added new features that expand the palette of what can be produced with this analog circuit.

The sound of the SD909 consists of two main sections: the binary noise generator and two modulated triangle oscillators. The oscillators provide the low end punch while the noise makes up the upper sonic spectrum, resulting in a combination that makes the 909 snare sound so rich. In the SD909 module the noise generator and oscillators are variable and voltage controlled, which pushes the circuit beyond its original boundaries offering new sounds as well as many variations of the original tone. The panel has markings to guide setting the knobs to reproduce the snare sound of the vintage machine.

Just like the other drums in this series, the SD909’s high-powered output gain stage allows further enhancement of the sound through distortion and clipping. We have designed a dual pulse-shaper circuit on each gate input so you can trigger your SD909 with Trigger/Gate signals from step sequencers, clock dividers, or any other pulse/clock sources. Also, the SD909 is equipped with access to the MIXZ MixBus matching the rest of the Tiptop line of percussive modules.
 
Download the SD909 manual HERE
 
 
In stock. Shipping in 24 H.Contact

189,00  Add to cart
Fold Processor
Fold Processor
Fold Processor

 

  • Type/ Wave Folder
  • Width/ 12HP
  • Power/ +60mA/-55mA
  • Depth/ 42mm

 
The Fold Processor is a voltage controlled wave multiplier and sub-octave generator. The circuit is based on a classic diode design that adds odd harmonics by folding the incoming signal, followed by subdivided square waves.

The wave folder creates new waveforms from the standard sine, triangle, sawtooth and square waves, has a dedicated output jack and CV input with an attenuator making it very easy to create beautifully animated folding sounds. Adjustable voltage controlled Inject alters the bias point creating an even wider palette of sounds.

The subdivide generator squares the fold output generating 4 more sounds spaced one octave apart, each with its own gain knob and mixed to the Subdivide output jack. Mixing the four can create anything from discordant square wave swarms to sweet harmonic oscillator stacks, from a stable square version of the folded wave to freaky PLL like glitched slides.

Overall results can sound evil at times and sweet at others, a true multi-faced devil.
 
Download the Fold Processor manual HERE
 


 
In stock. Shipping in 24 H.Contact

139,00  Add to cart
One
One
One

 

  • Type/ Sampler
  • Width/ 4HP
  • Power/ +80mA/-8mA
  • Depth/ 43mm

 
ONE brings organic sound and super low latency sample playback to the modular. It differs from other sample players in that it handles the digital audio bits as a continuously manipulated electrical flow, a feature inspired by our analog knowhow. This unique core makes ONE truly integral within the Tiptop percussive modular ecosystem thanks to a lightweight and responsive digital circuit with a very analog feel.

ONE brings a world of colors to the modular right out of the package. We have invited some of the best sound designers in the Industry to create professional sound libraries with content tailored to the unique sonic framework of the modular synthesizer and that fully takes advantage of ONE’s unique qualities. To start with, ONE comes with a SD card loaded with a free set of 60 sounds designed by Glitchmachines. More cards are available to purchase separately each containing carefully selected material with up to 256 sound files. Using your own sample libraries or recordings is easy too, just copy 16 or 24bit mono WAV files onto the SD card, pop the card into ONE and go.
 
Download the One manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

189,00  Add to cart
One (x4 Pack)
One (x4 Pack)
One (x4 Pack)

 

  • Type/ Sampler
  • Width/ 4HP
  • Power/ +80mA/-8mA
  • Depth/ 43mm

 
ONE brings organic sound and super low latency sample playback to the modular. It differs from other sample players in that it handles the digital audio bits as a continuously manipulated electrical flow, a feature inspired by our analog knowhow. This unique core makes ONE truly integral within the Tiptop percussive modular ecosystem thanks to a lightweight and responsive digital circuit with a very analog feel.

ONE brings a world of colors to the modular right out of the package. We have invited some of the best sound designers in the Industry to create professional sound libraries with content tailored to the unique sonic framework of the modular synthesizer and that fully takes advantage of ONE’s unique qualities. To start with, ONE comes with a SD card loaded with a free set of 60 sounds designed by Glitchmachines. More cards are available to purchase separately each containing carefully selected material with up to 256 sound files. Using your own sample libraries or recordings is easy too, just copy 16 or 24bit mono WAV files onto the SD card, pop the card into ONE and go.
 
Download the One manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

659,00  Add to cart
Z8000
Z8000
Z8000

 

  • Type/ Sequencer
  • Width/ 28HP
  • Power/ +70/-10mA
  • Depth/ 15mm
  •  

The Z8000 is a versatile and compact modulation source package based on ten separate sequencers which share 16 potentiometers. When you combine the sequencer rows with each other interesting and living sequences can be generated. If you turn one potentiometer, this can affect all ten sequences!
 
/Four 4 step CV sequencers on the horizontal.
/Four 4 step CV sequencers on the vertical.
/One 16 step CV sequencer on the horizontal.
/One 16 step CV sequencer on the vertical.
 
The Z8000 can simultaneously modulate up to 10 CV parameters poly-rhythmically, with unprecedented motion complexity. One knob affects all 10 CV outputs! Imagine modifying 10 parameters from one knob. With it’s 30 gate and clock inputs and 10 CV outputs one can only imagine the possibilities, and all clock inputs can even be driven at audio rates. The Z8000 pairs well with the Trigger Riot and Circadian Rhythms and using it with the QuantiZer extends its capabilities as a high precision 1V/Oct note sequencer.
 
Introduced in 2017, a new version of the Z8000 maintains the original circuitry but adds output range adjustment switches on the back and Tiptop’s new colored look which help highlight the sections.
 
Download de Z8000 manual HERE
 


 
In stock. Shipping in 24 H.Contact

409,00  Add to cart
Quantizer
Quantizer
Quantizer

 

  • Type/ Quantizer
  • Width/ 10HP
  • Power/ +60mA/-5mA
  • Depth/ 26mm

 

QuantiZer is a creative melody composing module that uses cutting edge analog electronics and DSP to tune analog VCOs precisely into Western musical scales.

The front panel is packed with functions that makes it very playable and intuitive to use, with a layout that moves forward from the typical quantizer design.

At its center is a slider that can be set to play notes, add Portamento to an incoming sequence, transpose a sequence with in an octave range or transpose a sequence with in 5 octave range.

The 12 note keyboard can be set to play notes manually, add and subtract notes from scales, transpose a sequence as well as setup a variety of settings that define the quantizer behavior and sync with other modules.

Major and Minor keys are both built in to let you switch scales in a very playable way, making it pretty easy to explore musical progression. There are also 24 user scales ready to be filled up with your own custom scales.

A built in sketch pad records and plays back keys entered manually on the keyboard and slider in sync with external clock and reset signal, or Tiptop’s SyncBus which chains the QuantiZer recording function to the Circadian Rhythms time line for precise recording and playback.

Scale CV in can be set to switch between changing scales or transposing pitches using CV from sequencers.
 
Download the QuantiZer manual HERE
 


 
In stock. Shipping in 24 H.Contact

319,00  Add to cart
Z2040 LP-VCF
Z2040 LP-VCF
Z2040 LP-VCF

 

  • Type/ Filter
  • Width/ 8HP
  • Power/ +20/-20mA
  • Depth/ 42mm

 

The Z2040 is a discrete clone of the Prophet 5`s low pass filter with come additonal features like voltage controlled gain and resonance. The gain parameter allows for overdriving the filter.

Voltage controlled, 24dB/octave steep, 4-pole lowpass filter based on the original US patent of the SSM2040 filter chip from Sequential Circuits' Prophet 5 Rev2.
FM is the cutoff modulation parameter with a voltage controllable modulation depth (VC-FM)

The gain is adjustable and until the 1h position (marked with “0dB”) the filter is pretty smooth but above that the sound gets more and more overdriven. A VCA pre-filter makes the gain voltage controllable; alternatively you can route the VCA post-filter with a jumper.

CONNECTORS
audio: input and output
CV inputs for cutoff (FM), cutoff modulation depth (VC-FM), gain and resonance
 
Download de Z2040 LP-VCF manual here
 


 
In stock. Shipping in 24 H.Contact

209,00  Add to cart
Circadian Rhythms
Circadian Rhythms
Circadian Rhythms

 

  • Type/ Sequencer
  • Width/ 36HP
  • Power/ +160/-0mA
  • Depth/ 30mm

 
Super interesting trigger sequncer techno monster. Sort of the control room for all your drums and all trigger issues with a vast number of loopable patterns with different lengths, loopable pattern groups, mute functions, individual shuffle per track (!) … Sequence length up to 512 steps, 24ppq resolution in Zoom view for detailed editing, trigger delay per step, 8th or 16th note swing, gate length up to 64 steps and so much more.
The idea of having several views is brilliant. The vertical view is pretty much the main view and is used to select columns (group, preset, steps, channel, mute etc) and for quick eighth-note programming.

The other views display the sequence horizontally and are used for more detailed programming:
The 8×8 view displays all 8th notes for each of the eight channels (= tracks) and allows for simultaneous programming of eight channels. 4×16 shows four sequeces at a time, each with a resolution of 16th notes. In the same manner 2×32 shows two chennels in a 32th note resoultion and 1×64 shows all 64 steps of one channel. With the up/down buttons you can proceed to the other channels in order to edit them.
 
Download de Circadian Rhythms manual here
 


 
In stock. Shipping in 24 H.Contact

649,00  Add to cart
Mantis Case (Green)
Mantis Case (Green)
Mantis Case (Green)

 
With Mantis we took our years of experience with Eurorack to create a low cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism you can set it to three different positions: 0, 45, 90 degrees.

Power Power and more Power! With Mantis say bye bye to the tedious, never-ending calculation of current consumption for the ±12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis comes with real Z-Rails according to Eurorack enclosure standards and not sliding nuts or wrong spacing. It also has keyed power connectors to help protect your modules from damage by plugging power in reverse.
 
 
Download the Mantis case manual HERE
 

 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

399,00  Add to cart
Mantis Case (Red)
Mantis Case (Red)
Mantis Case (Red)

 
With Mantis we took our years of experience with Eurorack to create a low cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism you can set it to three different positions: 0, 45, 90 degrees.

Power Power and more Power! With Mantis say bye bye to the tedious, never-ending calculation of current consumption for the ±12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis comes with real Z-Rails according to Eurorack enclosure standards and not sliding nuts or wrong spacing. It also has keyed power connectors to help protect your modules from damage by plugging power in reverse.
 
 
Download the Mantis case manual HERE
 

 
In stock. Shipping in 24 H.Contact

399,00  Add to cart
Mantis Case (Blue)
Mantis Case (Blue)
Mantis Case (Blue)

 
With Mantis we took our years of experience with Eurorack to create a low cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism you can set it to three different positions: 0, 45, 90 degrees.

Power Power and more Power! With Mantis say bye bye to the tedious, never-ending calculation of current consumption for the ±12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis comes with real Z-Rails according to Eurorack enclosure standards and not sliding nuts or wrong spacing. It also has keyed power connectors to help protect your modules from damage by plugging power in reverse.
 
 
Download the Mantis case manual HERE
 

 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

399,00  Add to cart
Mantis Case (Orange)
Mantis Case (Orange)
Mantis Case (Orange)

 
With Mantis we took our years of experience with Eurorack to create a low cost case that makes the Eurorack modular synthesizer look, work, and feel like a professional instrument. Mantis is an instrument that is at home on stage, touring or in the center of the studio.

Mantis has two rows of 104HP for you to rack your modules. It comes fully powered and assembled, just drop in your modules and play.

Using its sophisticated leg mechanism you can set it to three different positions: 0, 45, 90 degrees.

Power Power and more Power! With Mantis say bye bye to the tedious, never-ending calculation of current consumption for the ±12V power. Mantis comes with a juicy Zeus power supply that delivers plenty of power both now and for the future.

Mantis comes with real Z-Rails according to Eurorack enclosure standards and not sliding nuts or wrong spacing. It also has keyed power connectors to help protect your modules from damage by plugging power in reverse.
 
 
Download the Mantis case manual HERE
 

 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

399,00  Add to cart
Mantis Travel Bag
Mantis Travel Bag
Mantis Travel Bag

 
Mantis padded travel bag is made for a smooth ride. With its multiple straps it can be set to carry side-ways or as a backpack and the waterproof material keeps the elements out too. Internally it features a pouch to carry your Stackcables, power adapter and even a laptop computer.
 
In stock. Shipping in 24 H.Contact

44,00  Add to cart
Z3000 VCO
Z3000 VCO
Z3000 VCO

 

  • Type/ Voice
  • Width/ 14HP
  • Power/ +50/-25mA
  • Depth/ 26mm

 
The Z3000 is an innovative, intelligent all-analog Voltage Controlled Oscilaltor with an integrated tuner, linear and exponential FM, two sync methods and waveshaping on the sine wave. A proven and tested classic!
 
VCO with arithmetic processor that analyzes the frequency once per second.The display shows the current frequency – depending on the chosen mode the VCO frequency is shown as frequency in Hertz, note value or octave range. The external audio input offers the ability to use the arithmetic processor for tuning other VCOs.
Of course, the Z3000 has manual and voltage controlled pulse width modulation and the waveforms sine, triangle, pulse and sawtooth.
 
Besides the hard sync input for synching the VCO using square or sawtooth waves there is an additional Hard Sync Modulation input (HSM). This will not only accept any waveform but any audio signal which will modulate and distort the waveforms of the synchronised Z3000.
Additionaly there are 3 FM inputs, two exponential and a linear one. The CV inputs FM2 and Linear FM share a common attenuator. Frequency range of the Z3000 is 0.7Hz – 30kHz.
 
The version 2 is now built with SMD components and thus it´s PCB is very flat (pcb parallel to the faceplate). By the use of modern transistors the tracking got much more exact. The sawtooth now sounds a bit better and there´s a new feature: VC waveshaping on the sine and triangle wave! It blends from “trashy sawtooth” to sine/triangle.
 
Download de Z3000 VCO manual here
 


 
In stock. Shipping in 24 H.Contact

269,00  Add to cart
Trigger Riot
Trigger Riot

 

  • Type/ Sequencer
  • Width/ 28HP
  • Power/ +200/-0mA
  • Depth/ 28mm

 
An innovative and unique trigger sequencer with memory and an entirely new concept. It has an internal a clock generator but can be synched to an external clock, too. Eight channels process clocks, each by passing four clock dividers in a row. Each clock divider has manipulators like probability of trigger output, clock shift, clock multiplication and pulse width. Combine thee parameters and you´ll get very diversified and living trigger sequences.
 
The eight channels are laid out in four columns and four rows. In Matrix Mode the columns and rows interact with each other as the controls affect both. In Independent Mode you can select the channel you want to eit by pressing the Mute/Sel button. the Trigger Riot has an integrated precise clock generator but can be synched to an external clock of course. the tempo can be set in BPM. Besides that a Cycle Mode is available with adjustable start adn reset point,
 
Each channel has four clock dividers. Following parameters can be set for each of those:

  • Divide: sets the clock division
  • Step: allows setting of a single trigger on a given count
  • Probability: sets the probability a trigger will fire
  • Speed: sets the time base in internal clocks
  • Clock Shift: delays the division by full clocks
  • Time Shift: delays the division by fractions of a clock
  • Pulse Width: duty cycle of the trigger/gate from 0% to 100%

Combining this parameters will lead to overlapping of clocks, cancelling, shifting and will result in interesting rhythmical structures in the end.
Please check the extensive operation manual for more details, tips and tricks.
 
Download de Trigger Riot manual here
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

519,00  Add to cart
Z4000 VC-EG
Z4000 VC-EG

 

  • Type/ Envelope
  • Width/ 8HP
  • Power/ +34/-18mA
  • Depth/ 28mm

 
Very snappy ADSR type envelope generator with a CV proccessor that can scale the envelope signal, add an offset to it, mirrot and invert it. All four time and level parameters can be voltage controlled and the attack pameter´s characteristic is switchable.
The attack, decay and release potantiometers are scaled in a special way: the first 50% of the knob´s rotation are used for finest adjustment of very short envelope times from miliseconds to one second. This is useful to create snappy envelopes with minimum times without popping or clicking sounds. The rest of the knob´s rotation controls times from one second up to the minute range.
Attack, Decay, Sustain and Release can be controlled with voltages from 0V to 5V. The ATK switch selects between an exponential and a logarithmic attack curve. The Shoot button allows you to fire the envelope manually.

The voltage processor at the output has several functions. The Attenuverter attenuates and/or inverts the output voltage. The voltage controllable Deviator adds a static positive or negative offset voltage to the envelope. By combining those
ameters you can mirror the envelope or clip it. A bicolor LED indicates whether the envelope is in negative or positive voltage range.
 
Download de Z4000 VC-EG manual here
 


 
In stock. Shipping in 24 H.Contact

169,00  Add to cart