6 Channel Stereo Mixer
6 Channel Stereo Mixer

 

  • Type/ Mixer
  • Width/ 20HP
  • Power/ +70mA/-50mA
  • Depth/ 40mm

 
SPUTNIK 6-CHANNEL STEREO MIXER provides pristine stereo outputs as well as CV controllable panning. Full feature set includes:

  • Updated circuit no bleed
  • 6 total inputs with mute switches and volume control on each channel
  • Panning knobs for channels 2-4
  • Channels 1 and 6 allow for panning via CV input; the 1st channel is panned left and the 6th channel is panned right by default and +5v input will change pan (LEDs will signal left or right)
  • Stereo output, direct pre-fader mono sum output and attenuated headphone output
  •  VU-meter

 
Download the 6 Channel Stereo Mixer manual HERE
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

275,00  Add to cart
Dual Oscillator
Dual Oscillator

 

  • Type/ Oscillator
  • Width/ 8HP
  • Power/ +120mA/-110mA/ 5V 25mA
  • Depth/ 28mm

 
The Sputnik Dual Oscillator is 100% analog with both generators tracking v/oct, includes a timbre waveshaper plus harmonic dial, two FM inputs, 6 outputs including “Final” out, unipolar CV out and a modulation bus that allows for immediate and extreme timbral control.

The DUAL OSCILLATOR features:

  • Two Oscillators – Gen 1 with V/Oct, CV input, VCO or LFO mode switch, Triangle, Saw or Square selectable output and FM input. Gen 2 with V/Oct, CV input, FM input and external sync input.
  • Modulation control section including switches for AM, FM for Timbre bus modulation, CV input for modulation control amount, manual modulation index control and a sync switch making Gen 1 sync to Gen 2.
  • Harmonics section controls waveshaping of timbre and includes CV or manual controls for Symmetry and Order
  • Timbre section (primary waveshaping section) includes CV or manual control
  • Output 1 section includes 3 outputs: Triangle, Select (Triangle, Ramp, Square) waveform and unipolar CV output
  • Output 2 section includes 3 outputs: Sine, Square and Final (master output)

 
Download the Dual Oscillator manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

565,00  Add to cart
Oscillator
Oscillator

 

  • Type/ Oscillator
  • Width/ 14HP
  • Power/ +60mA/-60mA
  • Depth/ -mm

 
SPUTNIK OSCILLATOR features:

  •  Frequency + Fine Tune controls
  • CV input with attenuverter knob
  • 1v/oct input
  • FM input with attenuator knob
  • 4  outputs:
    Sine
    Triangle
    Waveshape – crossfade between sine and square or saw, selectable by a switch and can also be voltage controlled
    Sub – square wave 2 octaves down to original pitch

 
Download the Oscillator manual HERE
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

269,00  Add to cart
Four-Tap Delay/ Dual Crossfader
Four-Tap Delay/ Dual Crossfader

 

  • Type/ Effect
  • Width/ 22HP
  • Power/ +90mA/-90mA
  • Depth/ 40mm

 
SPUTNIK FOUR-TAP DELAY / DUAL CROSSFADER provides a wide range of delay options from extreme taps (note the x10 switch) to warbling tape feedback.

SIGNAL INPUTS

  • 3 input jacks with attenuator control knobs

ECHO/DELAY

  • Delay time attenuator control knob
  • x1 and x10 switch
  • CV input to control delay time + attenuator control knob
  • FM in with attenuator control knob

OUTPUTS

  • 4 distinct stereo outputs: 1/4t, 1/2t, 3/4t and full time

DUAL CROSSFADER

  • 2 audio inputs per crossfader
  • CV control input with control knob (fade from input 1-to-2)

 
Download the Four-Tap dekay/ Dual Crossfader manual HERE
 
 


This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

325,00  Add to cart
West Coast Random Source
West Coast Random Source

 

  • Type/ Generator
  • Width/ 8HP
  • Power/ +70mA/-70mA
  • Depth/ 28mm

 
SPUTNIK WEST COAST RANDOM SOURCE does exactly what its name suggests and is a random source of unpredictability, packed with functionality. West Coast Random Source features:

Fluctuating Random Voltages

  • Two sections for creating a fluctuating voltage
  • CV input and control over a bandwidth of .05hz to 50khz

Quantized Random Voltages

  • Pulse input for generating 1v/oct quantized random voltage
  • CV input and knob for controlling distribution of random voltages
  • Two different algorithmic outputs:
    N+1 states” and “2N states“. N is an integer number in the range 1…6 that can be adjusted with the manual control (Man N) and an external control voltage CVN with attenuator. Whenever the rising edge of the input clock signal (Clk In) appears a new random voltage is generated at the N+1 resp. 2N output. The N+1 output is capable to generate N+1 different voltage levels (or states), the 2N output up to 2Ndifferent states. If for example N is set to 4 the N+1 output generates up to 5, the 2N output 16 different states. The voltage steps of the 2N output are adjusted to 1/12 V in the factory.

Stored Random Voltages

  • Pulse input generates random voltage
  • 1st output covers 0-5V range
  • 2nd output is voltage controlled and knob alters the distribution of voltages

Noise Source

  • Three dedicated outputs for pink, white and blue noise

Sample & Hold

  • CV input, pulse input and CV output
  • odd/even pulse output (for deciding incoming pulses)
  • odd/even cv output (for sampled voltages)

Integrator

  • Portamento/slew/glide with voltage control over slew time

 
Download the manual HERE
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

325,00  Add to cart
Quad Function & Trigger Source
Quad Function & Trigger Source

 

  • Type/ Envelope
  • Width/ 28HP
  • Power/ +100mA/-60mA
  • Depth/ 28mm

 
SPUTNIK QUAD FUNCTION & TRIGGER SOURCE provides four independent or paired (quadrature mode) function generators for creating complex envelopes.

ATTACK AND DECAY

4 generators
The time range of each generator (.005 – 10 seconds) can be controlled via CV pulse input jacks for both attack and decay + control knobs
3-mode switch per generator: CYCLE (LFO), TRANSIENT, SUSTAINED

OUTPUT

Each generator includes CV output + pulse output that generates a transient pulse at the end of the decay segment: if the generator is in CYCLE mode for instance, that cycle will repeat
QUADRATURE MODE SWITCH with green LED: when engaged, 1+2 (or 3+4) work in tandem + a shift of 90 degrees to each other. These pairs can then be linked creating complex ADSR envelopes.
Dedicated outputs for 1+2 and 3+4 as well as attenuator knobs for mixing channels.
 
Download the Quad Function & Trigger Source manual HERE
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

325,00  Add to cart
CV Processor
CV Processor

 

  • Type/ Utility
  • Width/ 10HP
  • Power/ +40mA/-40mA
  • Depth/ -mm

 
The SPUTNIK CV PROCESSOR is a multi-functional module for manipulating Eurorack control signals. It can sum, invert, attenuate, amplify control voltages, also it can add offset to CV or crossfade between two CVs. Audio signals may be processed same way as the CVs with this module.

INPUTS

INPUT 1
Processes incoming CV via a front a panel attenuverter for bi-directional voltage control.

INPUT 2+3/CROSSFADER
Inputs 2 and 3 can be crossfaded by CV (0 to +5V) or manually using the crossfader knob.

OUTPUT

OFFSET
DC offset can be added to the final sum of the input stage.

SUM
Sum output of In 1 and the crossfaded mix of In 2 and In 3.

AMPLIFIER
Two independent amplifiers with manual control of gain ranging from unity to 2x gain. Designed to amplify Sputnik-standard 0-5V control voltages to up to 0-10V ranges for use with other Eurorack modules.
 
Download the CV Processor manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

185,00  Add to cart
5-Step Voltage Source
5-Step Voltage Source

 

  • Type/ Sequencer
  • Width/ 28HP
  • Power/ +50mA/-75mA
  • Depth/ -mm

 

The 5-Step Voltage Source is a full featured sequencer and voltage source for the Sputnik Modular system.

Pulser Control:

  • “Trig. In” to trigger Pulser
  • “Pulser” controls rate of pulses fired between .002 and 10 sec and the amount of pulses can be manually controlled or via CV “Time” input
  • Length (PW) of pulses can be manually adjusted from 0 – 100% and can be CV controlled via “Length”
  • Outputs pulses and sawtooth
  • Manual buttons for “Start” and “Stop” and both can also be CV controlled

CV and Pulse Outputs:

  • 4 rows (A-D) of 5 step voltage generators with individual CV or Pulse outputs + LED indicators
  • “All Pulse” output

Stage Select:

  • 5 “Stage Select” switches with trigger inputs and buttons for stage selection. Switches control length of sequence.
  • Stage Select “Address” CV input for controlling additional stage selection

 
Download the 5-Step Voltage Source manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

409,00  Add to cart
5-Step Voltage Source (Shafts Knobs)
5-Step Voltage Source (Shafts Knobs)

 

  • Type/ Sequencer
  • Width/ 28HP
  • Power/ +50mA/-75mA
  • Depth/ -mm

 

The 5-Step Voltage Source is a full featured sequencer and voltage source for the Sputnik Modular system.

Pulser Control:

  • “Trig. In” to trigger Pulser
  • “Pulser” controls rate of pulses fired between .002 and 10 sec and the amount of pulses can be manually controlled or via CV “Time” input
  • Length (PW) of pulses can be manually adjusted from 0 – 100% and can be CV controlled via “Length”
  • Outputs pulses and sawtooth
  • Manual buttons for “Start” and “Stop” and both can also be CV controlled

CV and Pulse Outputs:

  • 4 rows (A-D) of 5 step voltage generators with individual CV or Pulse outputs + LED indicators
  • “All Pulse” output

Stage Select:

  • 5 “Stage Select” switches with trigger inputs and buttons for stage selection. Switches control length of sequence.
  • Stage Select “Address” CV input for controlling additional stage selection

 
Download the 5-Step Voltage Source (Shafts Knobs) manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

385,00  Add to cart
EF/ Preamp
EF/ Preamp

 

  • Type/ Envelope
  • Width/ 8HP
  • Power/ +110mA/-20mA
  • Depth/ -mm

 
The EF/PREAMP is an envelope follower with a built-in instrument / mic preamplifier and includes the following features:

  • Switch between instrument or mic input
  • Preamp output is normalled to input of envelope follower
  • Signal input with manual sensitivity control
  • Manual decay control for CV output
  • Pulse output responds to change in signal level and activity is indicated by LED
  • Sustain or transient switch for pulse response/behavior (gate)
  • The SPUTNIK ENVELOPE FOLLOWER/PREAMP is a dual function module that allows audio signals to be brought up to proper levels to be sonically manipulated by other Eurorack modules or to be converted into control voltage. The preamp section includes a balanced ¼” TRS cable input jack that can accept sound sources such as microphones, guitar pickups, keyboards, drum machines, etc. Three selectable gain modes are available via a switch with an additional gain knob to dial in the signal to the exact level you need. The envelope follower section of the module features an input jack for modular level signals and outputs for CV and pulses. Front panel knobs give you control over input sensitivity and CV envelope decay time.
     
    Download the EF/ Preamp manual HERE
     


     
    This product is being manufactured or shortly avalilable in overseas.
    Shipping in 14-28 days. Contact for more info
    Contact

185,00  Add to cart
Quad VCF/VCA
Quad VCF/VCA

 

  • Type/ VCA
  • Width/ 8HP
  • Power/ +50mA/-70mA
  • Depth/ 28mm

 
SPUTNIK QUAD VCF/VCA is a Quad Lopass Gate and each of the four independent gates have a selectable switch for VCF, COMBO and VCA . CV input varies the gain from -120dB to +3dB gain. The control knobs for each will also determine levels and cutoff frequencies. Outputs include individual outputs, “ALL” (all outputs summed for voltage controlled mixing), “ODD” (1+3 outputs summed) and “EVEN” (2+4 outputs summed).
 
Download the Quad VCF/VCA manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

325,00  Add to cart
Selector
Selector

 

  • Type/ Switch
  • Width/ 6HP
  • Power/ +15mA/-15mA/ 5V 10mA
  • Depth/ 28mm

 
The SELECTOR is a 4 in 1 out sequential switch and includes the following features:

  • 4 inputs with LEDs (lit when active)
  • 2-4 step selector switch
  • Up, down and random selector switch
  • Holding Trigger and Reset buttons for 3 seconds replaces “up” mode with “pendulum”
  • Regular output as well as inverted output
  • Perfect companion to 5-Step Voltage Source (expands to 20 steps) and 16-Step Voltage Source (expands to 64 steps)

The SPUTNIK SELECTOR is a sequential switch that allows the automated routing of one of four inputs to a single output. The Selector is able to switch between 2, 3, or 4 of the inputs and four direction modes (three on the front panel and one “hidden” mode) are available. Input selection can be advanced by a trigger/gate input or manual button.
 
Download the Selector manual HERE
 


 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

165,00  Add to cart
Valve Multiplier
Valve Multiplier

 

  • Type/ VCA
  • Width/ 8HP
  • Power/ +75mA/-70mA
  • Depth/ -mm

 
The VALVE MULTIPLIER features:

  • 6 total inputs that can also be used as 6 VCA’s
  • Inputs are normalled sequentially with buffers
  • Inputs 1 and 2 include exponential CV inputs
  • Inputs 3-6 include linear CV inputs
  • Manual attenuator
  • Inputs are normalled to +5v (VCA’s fully open until cv introduced)

The SPUTNIK VALVE MULTIPLIER is a bank of six VCAs (voltage controlled amplifiers) for voltage control of audio or CV signal levels. Channels 1 and 2 feature an exponential CV response and channels 3-6 have a linear response. Channel 6 features two inverted outputs, one from the output jack and one with an attenuator. Each input is also sequentially normalized, allowing a single input to be applied to multiple VCAs.
 
Download the Valve Multiplier manual HERE
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

195,00  Add to cart
Keyboard
Keyboard

 

  • Type/ Controller
  • Width/ 84HP
  • Power/ +50mA/-50mA
  • Depth/ 30mm

 
The Sputnik Modular Multi-Touch Keyboard Controller includes 29 keys, up to 4 voices and the following features:

CONTROL PER KEY

  • 1v/oct
  • “Pressure” CV (measured surface amount)
  • Gate CV

ARPEGGIATOR

  • Internal and External sync switch
  • Up, Down, and Random modes
  • CV Trigger input
  • Manual Time control control knob
  • Hold

MODES

  • Polyphony Mono/Arp or Poly (2,3,4 voices)
  • Octave switch for +1, +2
  • In Mono/Arp mode, CV2 sends CV1+2 semitones, CV3 sends CV1+4 semitones, CV4 sends + 7 semitones
  • In Mono/Arp mode Gate 1 sends every gate, Gate 2 every 2nd gate, Gate 3 every 3rd gate and Gate 4 every 4th gate and can work like a clock divider

LOCATION SENSOR

  • Touch sensitive location strip with both CV and Gate outputs

MONO OUTPUTS

  • CV 1 out
  • Gate 1 out
  • Pressure CV out

POLYPHONIC OUTPUTS

  • 2,3,4 voice switch
  • CV 2-4 outs
  • Gate 2-4 outs
  • All Pulses out

Also includes a 5v or 10v switch on the PCB for Pressure and Location
 
Download the Keyboard manual HERE
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

549,00  Add to cart