CGM Creative Mixer Channel
CGM Creative Mixer Channel
CGM Creative Mixer Channel

 

  • Type/ Mixer
  • Width/ 6HP
  • Power/ +80mA/-80mA
  • Depth/ 43mm

 

The CGM Creative Mixer is a modular mixing solution for eurorack modular systems, designed to obtain a flexible setup, providing all the tools you may need in studio and during a live performance, as well as everything you may want to control via CV.
It is currently composed of three modules: the Channel, the Group and the Master.

The CGM Channel module manages mono signals via the 3.5 mm input mono jack. It has a main stereo VCA with CV in and attenuator (RED), a direct output post main VCA (pre or post fader), two parallel sends with mono VCA with CV in and attenuator for each send and pre/post fader switch (YELLOW and GREEN), and a PAN control with offset CV and offset pot. This, together with the latching buttons for mute, solo in place, and PFL, manages the incoming signal and distributes it to the Group module.

Without any CV applied and all pot at maximum, gain scale, referred to channel input, is:
– 7.5 dB on channel direct output
– 4 dB on send output (with 5V CV patched to main VCA)
– 12.5 dB on group output (jumpers allowing output of sum of channels and return)
– 18 dB on master output and 20dB on headphones.

Frequency response: All system is guaranteed from 10Hz to 40KHz bandwidth within 1dB, measured at +10dBu at master output onto a 1KO load.
Harmonic Distortion (THD+N): on a complete system (Channel to group to master) less than 0.3%, measured at 1KHz with output signal of +10 dBu onto 1KO load with a 10Hz to 80KHz bandwidth measurement system.

This product will be in stock soon. Shipping within 2-5 days usually.Contact
 
 

199,00  Add to cart
Plus Modular Case 1 PC
Plus Modular Case 1 PC
Plus Modular Case 1 PC

1 pc x 42HP single PLUS modular case

Includes a single PLUS modular case, sliding nuts and the necessary screws, nuts, washers and pins to allow a connection with another PLUS module.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

69,90  Add to cart
Plus Modular Modular Case 4 PC
Plus Modular Modular Case 4 PC
Plus Modular Modular Case 4 PC

Four slotted PLUS modules, designed to increase the rows of your PLUS based setup. Each piece has a slot on one side to let the power distribution pass through the rows.

Includes a 4 PLUS slotted modules, sliding nuts and the necessary screws, nuts, washers and pins to allow a connection within them.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

249,90  Add to cart
Square Nuts
Square Nuts

Frap Tools Square Nuts Pack 100 pcs.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

3,90  Add to cart
M3x6 Hex Screws
M3x6 Hex Screws

M3x6 Panhead hex screws with round head pack 100 pcs
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

9,90  Add to cart
CGM Creative Mixer Master
CGM Creative Mixer Master
CGM Creative Mixer Master

 

  • Type/ Mixer
  • Width/ 6HP
  • Power/ +mA/-mA
  • Depth/ -mm

 
The CGM Creative Mixer is a modular mixing solution for eurorack modular systems, designed to obtain a flexible setup, providing all the tools you may need in studio and during a live performance, as well as everything you may want to control via CV.
It is currently composed of three modules: the Channel, the Group and the Master.

The CGM Master module sums the incoming signals from the CGM Groups modules, and manages the PFL (stereo) of both Channels and Groups modules. It also features a stereo in via a 3.5 mm stereo jack with PFL latching button and a stereo out via 3.5 mm stereo jack for headphones, whose signal can be blended between PFL (BLUE) and main out (WHITE).
You can connect also up to 4 Groups to a Master module.

Without any CV applied and all pot at maximum, gain scale, referred to channel input, is:
– 7.5 dB on channel direct output
– 4 dB on send output (with 5V CV patched to main VCA)
– 12.5 dB on group output (jumpers allowing output of sum of channels and return)
– 18 dB on master output and 20dB on headphones.
Master aux input gain is 27 dB referred to master output.

Frequency response: All system is guaranteed from 10Hz to 40KHz bandwidth within 1dB, measured at +10dBu at master output onto a 1KO load.
Harmonic Distortion (THD+N): on a complete system (Channel to group to master) less than 0.3%, measured at 1KHz with output signal of +10 dBu onto 1KO load with a 10Hz to 80KHz bandwidth measurement system.

Stereo audio input impedance > 3KO

Includes power cable and a Master to 1 Group Link Cable. Read the manual at http://frap.tools/manuals/mixer for complete instructions on how to connect the master to the group(s).
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

149,00  Add to cart
SEI Trunk Line/USB Power
SEI Trunk Line/USB Power
SEI Trunk Line/USB Power

Frap Tools SEI Trunk Line/USB Power for UNO cases that did not come with a SILTA power supply.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

89,90  Add to cart
SILTA Power Board Module 6HP
SILTA Power Board Module 6HP
SILTA Power Board Module 6HP

Frap Tools SILTA Power Board Module 6HP with flying bus skiff-friendly, can be expanded with daisy-chain cables (up to 3 SILTA modules can be oiwered with one power brick).
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

179,90  Add to cart
SILTA Flying Bus
SILTA Flying Bus

SILTA Flying Bus with 12 slots for modules.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

15,90  Add to cart
SILTA Power Brick 90W EU
SILTA Power Brick 90W EU

90W 24V DC external power brick with EU/Schuko cable.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

59,90  Add to cart
Uno Pear 126 HP
Uno Pear 126 HP
Uno Pear 126 HP

Portable and foldable Eurorack case with three rows à 126HP width and a depth of up to 85mm in the middle row, 50 mm in the upper and lower row.

In this simple metal case with pear wood sides all screws and folding mechanisims are hidden, the case is “ready to go” as it is equipped with a SILTA power distribution (3.75A @ +12V, 3.75A @ -12V, 1.5A @ +5V), an external power supply (24V DC, 90W) and the SEI module. Apart from that you get a soft bag with inner padding made with a 5 mm closed cells polyurethane foam.

The case and the modules are safe from rain since the bag has a double zip. The soft bag has two handles and a shoulder belt, furthermore there is a pocket on the outside for the power supply and some patch cables.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

2.099,00  Add to cart
Uno Pear 84 HP
Uno Pear 84 HP
Uno Pear 84 HP

Portable and foldable Eurorack case with three rows à 84HP width and a depth of up to 85mm in the middle row, 50 mm in the upper and lower row.

In this simple metal case with pear wood sides all screws and folding mechanisims are hidden, the case is “ready to go” as it is equipped with a SILTA power distribution (3.75A @ +12V, 3.75A @ -12V, 1.5A @ +5V), an external power supply (24V DC, 90W) and the SEI module. Apart from that you get a soft bag with inner padding made with a 5 mm closed cells polyurethane foam.

The case and the modules are safe from rain since the bag has a double zip. The soft bag has two handles and a shoulder belt, furthermore there is a pocket on the outside for the power supply and some patch cables.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

1.749,00  Add to cart
Uno Wenge 126 HP
Uno Wenge 126 HP
Uno Wenge 126 HP

Portable and foldable Eurorack case with three rows à 126HP width and a depth of up to 85mm in the middle row, 50 mm in the upper and lower row.

In this simple metal case with wenge wood sides all screws and folding mechanisims are hidden, the case is “ready to go” as it is equipped with a SILTA power distribution (3.75A @ +12V, 3.75A @ -12V, 1.5A @ +5V), an external power supply (24V DC, 90W) and the SEI module. Apart from that you get a soft bag with inner padding made with a 5 mm closed cells polyurethane foam.

The case and the modules are safe from rain since the bag has a double zip. The soft bag has two handles and a shoulder belt, furthermore there is a pocket on the outside for the power supply and some patch cables.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

2.099,00  Add to cart
Uno Wenge 84 HP
Uno Wenge 84 HP
Uno Wenge 84 HP

Portable and foldable Eurorack case with three rows à 84HP width and a depth of up to 85mm in the middle row, 50 mm in the upper and lower row.

In this simple metal case with wenge wood sides all screws and folding mechanisims are hidden, the case is “ready to go” as it is equipped with a SILTA power distribution (3.75A @ +12V, 3.75A @ -12V, 1.5A @ +5V), an external power supply (24V DC, 90W) and the SEI module. Apart from that you get a soft bag with inner padding made with a 5 mm closed cells polyurethane foam.

The case and the modules are safe from rain since the bag has a double zip. The soft bag has two handles and a shoulder belt, furthermore there is a pocket on the outside for the power supply and some patch cables.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

1.749,00  Add to cart
Uno Zebra 126 HP
Uno Zebra 126 HP
Uno Zebra 126 HP

Portable and foldable Eurorack case with three rows à 126HP width and a depth of up to 85mm in the middle row, 50 mm in the upper and lower row.

In this simple metal case with zebra wood sides all screws and folding mechanisims are hidden, the case is “ready to go” as it is equipped with a SILTA power distribution (3.75A @ +12V, 3.75A @ -12V, 1.5A @ +5V), an external power supply (24V DC, 90W) and the SEI module. Apart from that you get a soft bag with inner padding made with a 5 mm closed cells polyurethane foam.

The case and the modules are safe from rain since the bag has a double zip. The soft bag has two handles and a shoulder belt, furthermore there is a pocket on the outside for the power supply and some patch cables.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

2.099,00  Add to cart
Uno Zebra 84 HP
Uno Zebra 84 HP
Uno Zebra 84 HP

Portable and foldable Eurorack case with three rows à 84HP width and a depth of up to 85mm in the middle row, 50 mm in the upper and lower row.

In this simple metal case with zebra wood sides all screws and folding mechanisims are hidden, the case is “ready to go” as it is equipped with a SILTA power distribution (3.75A @ +12V, 3.75A @ -12V, 1.5A @ +5V), an external power supply (24V DC, 90W) and the SEI module. Apart from that you get a soft bag with inner padding made with a 5 mm closed cells polyurethane foam.

The case and the modules are safe from rain since the bag has a double zip. The soft bag has two handles and a shoulder belt, furthermore there is a pocket on the outside for the power supply and some patch cables.
 
 
This product is being manufactured or shortly avalilable in overseas.
Shipping in 14-28 days. Contact for more info
Contact

1.749,00  Add to cart