Finaliser R-EQ black
Finaliser R-EQ black
Finaliser R-EQ black

 

  • Type/ Effect
  • Width/ 18HP
  • Power/ +105mA/-55mA
  • Depth/ -mm

 
This is three functions in one module:

a) Seven DSP based Reverbs, including Spring, Ambience, Room, Large Hall, Small Church, Large Church, Reverse and also a 380ms fixed delay. The reverb amount (wet dry mix) can be Voltage controlled.

b) A four band equaliser, with three of the bands (low, low-mid, high-mid) being sweepable Parametric EQ, and the fourth band (High) having selectable centre frequency. The EQ range is approx +/-15dB. The EQ section has a bypass switch so it can be defeated.

c) A sonic maximiser / aural exciter – this has two controls, enhance low and enhance high. These add some low and high “punch” to the sounds. It has a bypass function too, and the maximiser can be used in conjunction with both eq and reverb.

The module is mono in/mono out, or mono in/Stereo out. There is also a stereo in/stereo out mode, but this is for the reverb only. The EQ and maximiser work on the left channel only and are mono effects.
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

419,00  Add to cart
Finaliser R-EQ silver
Finaliser R-EQ silver
Finaliser R-EQ silver

 

  • Type/ Effect
  • Width/ 18HP
  • Power/ +105mA/-55mA
  • Depth/ -mm

 
This is three functions in one module:

a) Seven DSP based Reverbs, including Spring, Ambience, Room, Large Hall, Small Church, Large Church, Reverse and also a 380ms fixed delay. The reverb amount (wet dry mix) can be Voltage controlled.

b) A four band equaliser, with three of the bands (low, low-mid, high-mid) being sweepable Parametric EQ, and the fourth band (High) having selectable centre frequency. The EQ range is approx +/-15dB. The EQ section has a bypass switch so it can be defeated.

c) A sonic maximiser / aural exciter – this has two controls, enhance low and enhance high. These add some low and high “punch” to the sounds. It has a bypass function too, and the maximiser can be used in conjunction with both eq and reverb.

The module is mono in/mono out, or mono in/Stereo out. There is also a stereo in/stereo out mode, but this is for the reverb only. The EQ and maximiser work on the left channel only and are mono effects.
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

419,00  Add to cart
Gemini 2412 Dual SVF black
Gemini 2412 Dual SVF black
Gemini 2412 Dual SVF black

 

  • Type/ Filter
  • Width/ 28HP
  • Power/ +50mA/-45mA
  • Depth/ 24mm

 
This module comprises two fully featured, and beautiful sounding 12db multimode filters, based around the classic vintage SEM filters. Each individual filter has LP, BP and HP outputs, along with a variable output that can be swept from LP through to HP response, with a notch effect at centre position. All of the outputs are available simultaneously, and there is Voltage control of Frequency and Resonance amount. There is a switch that connects them into either Serial (cascaded) mode, or Parallel (Dual) mode. In both of these modes the four way rotary switch is used to select the individual filter type.

The Dual FCV Controls allow add a frequency CV simultaneously to both filters, the second FCV Mix control that determines how much of the Dual FCV goes to VCF1 and VCF2. So this allows a range of filter effects with a single control voltage. In dual mode the two filters are connected in parallel, and can be crossfaded between them using the Audio Mix control (CV controllable). There is an “Invert” switch, which reverses the phase of one filter against the other, which allows further variations in filter response in Dual Mode.
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

419,00  Add to cart
Gemini 2412 Dual SVF silver
Gemini 2412 Dual SVF silver
Gemini 2412 Dual SVF silver

 

  • Type/ Filter
  • Width/ 28HP
  • Power/ +50mA/-45mA
  • Depth/ 24mm

 
This module comprises two fully featured, and beautiful sounding 12db multimode filters, based around the classic vintage SEM filters. Each individual filter has LP, BP and HP outputs, along with a variable output that can be swept from LP through to HP response, with a notch effect at centre position. All of the outputs are available simultaneously, and there is Voltage control of Frequency and Resonance amount. There is a switch that connects them into either Serial (cascaded) mode, or Parallel (Dual) mode. In both of these modes the four way rotary switch is used to select the individual filter type.

The Dual FCV Controls allow add a frequency CV simultaneously to both filters, the second FCV Mix control that determines how much of the Dual FCV goes to VCF1 and VCF2. So this allows a range of filter effects with a single control voltage. In dual mode the two filters are connected in parallel, and can be crossfaded between them using the Audio Mix control (CV controllable). There is an “Invert” switch, which reverses the phase of one filter against the other, which allows further variations in filter response in Dual Mode.
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

419,00  Add to cart
Mega-Phase 12 black
Mega-Phase 12 black
Mega-Phase 12 black

 

  • Type/ Effect
  • Width/ 18HP
  • Power/ +70mA/-65mA
  • Depth/ 24mm

 
This is based on the vintage EH Smallstone phaser – which was 4 stages. So all of the JMJarre style Equinoxe sounds are readily available.
However, it has been expanded to 12 stages, with some unique features – an eight way rotary switch to select the Output stage, and a second eight way switch for selection of the Emphasis (feedback path). So it is possible to e.g. have a six Stage filter with Emphasis from the 11th Stage, or other combinations.

This allows a huge range of sounds, particularly as it includes odd numbered stages – each stage of the phaser is inverting, so selecting an even stage for output and an odd stage for Emphasis creates a different variety of Phase cancellations. It has Voltage Control of Phasing amount from dry to wet, and also Voltage Control of Emphasis amount too. The normal phaser output is a 50/50 mix of wet dry, but It has a “wet” output too along with a second audio input – this allows an external effect to be added as a second Emphasis path.
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

419,00  Add to cart
Mega-Phase 12 silver
Mega-Phase 12 silver
Mega-Phase 12 silver

 

  • Type/ Effect
  • Width/ 18HP
  • Power/ +70mA/-65mA
  • Depth/ 24mm

 
This is based on the vintage EH Smallstone phaser – which was 4 stages. So all of the JMJarre style Equinoxe sounds are readily available.
However, it has been expanded to 12 stages, with some unique features – an eight way rotary switch to select the Output stage, and a second eight way switch for selection of the Emphasis (feedback path). So it is possible to e.g. have a six Stage filter with Emphasis from the 11th Stage, or other combinations.

This allows a huge range of sounds, particularly as it includes odd numbered stages – each stage of the phaser is inverting, so selecting an even stage for output and an odd stage for Emphasis creates a different variety of Phase cancellations. It has Voltage Control of Phasing amount from dry to wet, and also Voltage Control of Emphasis amount too. The normal phaser output is a 50/50 mix of wet dry, but It has a “wet” output too along with a second audio input – this allows an external effect to be added as a second Emphasis path.
 


 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

419,00  Add to cart
MiniMod Dual LFO + VCA black
MiniMod Dual LFO + VCA black
MiniMod Dual LFO + VCA black

 

  • Type/ LFO
  • Width/ 10HP
  • Power/ +25mA/-22mA
  • Depth/ 26mm

 
Dual LFO and VCA module 10HP wide. – This has two LFO’s each with variable waveshape. It includes a DC coupled VCA.

The Dual LFO + VCA comes equipped with two low-frequency oscillators, each featuring a triangle and a pulse output. Utilizing two of the module’s potentiometers, the shape respectively width of the waveforms can be adjusted. Therefore, it is easily possible to transform a triangle into a saw tooth or ramp wave. – Or anything in between. The other potentiometers allow users to adjust the LFO rates. Additionally, the first modulator features a switch for changing its tempo range plus there is a Sync input. The second LFO is normalized to the module’s linear VCA. It can be controlled via a CV input. This setup is very handy for regulating the low frequency oscillator’s modulation depth via, for instance, the modulation wheel of a keyboard.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

295,00  Add to cart
MiniMod Dual LFO + VCA silver
MiniMod Dual LFO + VCA silver
MiniMod Dual LFO + VCA silver

 

  • Type/ LFO
  • Width/ 10HP
  • Power/ +25mA/-22mA
  • Depth/ 26mm

 
Dual LFO and VCA module 10HP wide. – This has two LFO’s each with variable waveshape. It includes a DC coupled VCA.

The Dual LFO + VCA comes equipped with two low-frequency oscillators, each featuring a triangle and a pulse output. Utilizing two of the module’s potentiometers, the shape respectively width of the waveforms can be adjusted. Therefore, it is easily possible to transform a triangle into a saw tooth or ramp wave. – Or anything in between. The other potentiometers allow users to adjust the LFO rates. Additionally, the first modulator features a switch for changing its tempo range plus there is a Sync input. The second LFO is normalized to the module’s linear VCA. It can be controlled via a CV input. This setup is very handy for regulating the low frequency oscillator’s modulation depth via, for instance, the modulation wheel of a keyboard.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

275,00  Add to cart
MiniMod CV Mix-Offset VCA black
MiniMod CV Mix-Offset VCA black
MiniMod CV Mix-Offset VCA black

 

  • Type/ Mixer
  • Width/ 10HP
  • Power/ +30mA/-12mA
  • Depth/ 26mm

 
The MiniMod CVMix-Offset-VCA is a compact 10hp wide Eurorack format module. It has been developed to offer a range of useful utilities for the MiniMod system and of course other Eurorack synthesisers..

It comprises a four channel polarising mixer, amplifier, inverter, a voltage source and a DC coupled VCA with switchable CV offset.

Uses include mixing together CV modulation sources, mixing an offset voltage with a CV source, converting a bipolar +/- 5V modulation into a unipolar 0 to +5V.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

225,00  Add to cart
MiniMod CV Mix-Offset VCA silver
MiniMod CV Mix-Offset VCA silver
MiniMod CV Mix-Offset VCA silver

 

  • Type/ Mixer
  • Width/ 10HP
  • Power/ +30mA/-12mA
  • Depth/ 26mm

 
The MiniMod CVMix-Offset-VCA is a compact 10hp wide Eurorack format module. It has been developed to offer a range of useful utilities for the MiniMod system and of course other Eurorack synthesisers..

It comprises a four channel polarising mixer, amplifier, inverter, a voltage source and a DC coupled VCA with switchable CV offset.

Uses include mixing together CV modulation sources, mixing an offset voltage with a CV source, converting a bipolar +/- 5V modulation into a unipolar 0 to +5V.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

205,00  Add to cart
MiniMod DH-ADSR black
MiniMod DH-ADSR black
MiniMod DH-ADSR black

 

  • Type/ Envelope
  • Width/ 10HP
  • Power/ +30mA/-12mA
  • Depth/ 26mm

 
The Complex Envelope Generator is based on one channel of the existing MiniMod Dual EG. In order to increase versatility, it has a Release control added to the envelope so that it is full ADSR but still with the characteristics of the Model D.
However, further additions were made: a pulse delay and pulse stretch circuit, along with a re-trigger facility (both of these can be switched out of circuit so that the envelope is a simple ADSR unit). The addition of pulse conditioning and retrigger makes it into an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, but with a full ADSR envelope too…
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

295,00  Add to cart
MiniMod DH-ADSR silver
MiniMod DH-ADSR silver
MiniMod DH-ADSR silver

 

  • Type/ Envelope
  • Width/ 10HP
  • Power/ +30mA/-12mA
  • Depth/ 26mm

 
The Complex Envelope Generator is based on one channel of the existing MiniMod Dual EG. In order to increase versatility, it has a Release control added to the envelope so that it is full ADSR but still with the characteristics of the Model D.
However, further additions were made: a pulse delay and pulse stretch circuit, along with a re-trigger facility (both of these can be switched out of circuit so that the envelope is a simple ADSR unit). The addition of pulse conditioning and retrigger makes it into an LFO module and it can perform in a similar way to the EMS Synthi A and VCS3 Trapezoid generator, but with a full ADSR envelope too…
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

275,00  Add to cart
V-Scale variable Buffer Silver
V-Scale variable Buffer Silver
V-Scale variable Buffer Silver

 

  • Type/ Utility
  • Width/ 4HP
  • Power/ –
  • Depth/ –

 
This is a precision active buffer and multiple. This module has outstanding performance: it features very high input impedance, very low output impedance and an offset voltage of 1mV.

Not all active multi’s are born equal, some designs do not fully solve impedance mismatch and tracking problems ..or they apply offset voltages to the output and in rare cases can cause more problems than they solve!

AJH Synth have added a very useful (and unique) feature to cure tracking problems: four of the five outputs can be adjusted up or down by +/-5% from the front panel, so that VCO’s and VCF’s that don’t track 1V/Oct exactly can be easily compensated to track correctly without having to re-calibrate the VCO or VCF themselves.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

129,00  Add to cart
V-Scale variable Buffer Black
V-Scale variable Buffer Black
V-Scale variable Buffer Black

 

  • Type/ Utility
  • Width/ 4HP
  • Power/ –
  • Depth/ –

 
This is a precision active buffer and multiple. This module has outstanding performance: it features very high input impedance, very low output impedance and an offset voltage of 1mV.

Not all active multi’s are born equal, some designs do not fully solve impedance mismatch and tracking problems ..or they apply offset voltages to the output and in rare cases can cause more problems than they solve!

AJH Synth have added a very useful (and unique) feature to cure tracking problems: four of the five outputs can be adjusted up or down by +/-5% from the front panel, so that VCO’s and VCF’s that don’t track 1V/Oct exactly can be easily compensated to track correctly without having to re-calibrate the VCO or VCF themselves.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

129,00  Add to cart
MiniMod VCO Silver
MiniMod VCO Silver
MiniMod VCO Silver

 

  • Type/ Oscillator
  • Width/ 14HP
  • Power/ +55mA/-40mA
  • Depth/ 38mm

 

The discrete transistor core of this Voltage Controlled Oscillator is an exact emulation of the original and now very rare R A Moog Model D Oscillator from 45 years ago, and the resulting waveforms and sounds are exactly as the original, as big, fat and sweet as ever!

It features front panel switchable octave selection and four independent waveform outputs including the famous “Sharktooth” wave, Sawtooth wave, Square wave and Triangle wave.

The Square wave output now has fully adjustable Pulse Width Modulation, with manual and CV control rather than the more restricting selection of two static fixed pulse widths or square wave of the original design.

We have added extra features too, including exponential and linear modulation inputs and two different types of oscillator sync which help to make this a very versatile Eurorack VCO in its own right.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

345,00  Add to cart
MiniMod VCO Black
MiniMod VCO Black
MiniMod VCO Black

 

  • Type/ Oscillator
  • Width/ 14HP
  • Power/ +55mA/-40mA
  • Depth/ 38mm

 

The discrete transistor core of this Voltage Controlled Oscillator is an exact emulation of the original and now very rare R A Moog Model D Oscillator from 45 years ago, and the resulting waveforms and sounds are exactly as the original, as big, fat and sweet as ever!

It features front panel switchable octave selection and four independent waveform outputs including the famous “Sharktooth” wave, Sawtooth wave, Square wave and Triangle wave.

The Square wave output now has fully adjustable Pulse Width Modulation, with manual and CV control rather than the more restricting selection of two static fixed pulse widths or square wave of the original design.

We have added extra features too, including exponential and linear modulation inputs and two different types of oscillator sync which help to make this a very versatile Eurorack VCO in its own right.
 
 
This product will be in stock soon. Shipping within 2-5 days usually.Contact

365,00  Add to cart